600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light Introduction
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light The square design is simple and clear, beautiful and elegant, which can be easily integrated into various home decoration styles and enhance the overall style.
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light is equipped with Philips quality LED driver, excellent performance, PF>0.95, flicker rate less than 3%, no video flicker.
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light backlight design, it will not turn yellow even after years of use, breaking through the defects of traditional LED lights, it can illuminate the back area of the lamp body, make the ceiling without dark areas, and make the vision brighter.
100-240V/AC wide input voltage to meet various applications.
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light has a lumen efficiency of up to 100Lm/W, providing uniform light distribution, soft and comfortable light.
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light adopts special spraying process, which has very good anti-rust ability and high reflectivity.
It has four functions of OCP, CVP, SCP and OTR.
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light Advantages
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light innovative backlight design, breaking the traditional LED lighting can only illuminate the ceiling below the defect, so that the lamp body can also illuminate the ceiling area, creating a bright vision, more comfortable visual experience; 600 *600mm 2FT*2FT backlight Ceiling flat Led Panel Light High lumen efficiency, soft and delicate light, bring comfortable visual experience, long-term eye fatigue
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light adopts high-quality LED light source, with low flicker rate, no video flicker during use, and protects eyes for healthy eyes.
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light application field
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light is widely used in offices, schools, hospitals, shopping malls, home and other places because of its good illuminance uniformity, higher CRI, uniform and soft light, and comfort. The best product of the era to replace traditional grille light panels.
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light installation method
1. First of all, we need to cut off all the power supply, and cut it with scissors on the light body of the light strip. If it is not cut, it may cause a unit not to light up. When installing, put the 600*600mm 2FT*2FT The backlight Ceiling flat Led Panel Light light strip is bent to one side, and the copper wire is exposed to 23 meters. Then use scissors to cut it clean without leaving any burrs. If the burrs exist on the wire, it is likely to cause a short circuit in the later stage. phenomenon occurs.
2. During the installation of the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light, the power supply cannot be turned on. The power supply cannot be turned on until the installation is completed correctly.
3. If the temperature is relatively low in winter, when installing 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light, you can turn on the power for a few minutes to soften the lamp body and then turn off the power, which can make the lamp body soft. , it will be easier to install.
4. During the installation process, do not let the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light collide with some heavy objects to prevent fragmentation during the collision. 600*600mm 2FT*2FT The tail end of the backlight Ceiling flat Led Panel Light should be secured with a tail plug cover and glue.
5. Then connect two sections of 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light with the same voltage in series. The total length of the series cannot exceed the total length that the power supply can carry. Each interface must be firm and there is no exposed wire. , After connecting, be sure to check whether there is unevenness and frizz at each interface. If there is nothing unusual, you can turn on the power to see if it can be used normally. If it can be used normally, it means that the installation has been completed.
LED lights are one of the most commonly used lamps in life, and you should pay attention to all aspects during use. So, how to fix the LED light is not bright but there is weak light? What should I pay attention to when using LED light strips?
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light is not bright but there is weak light how to fix it?
Generally speaking, it is caused by some 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light lamp beads not lighting up, such as internal damage or short circuit. If damaged, it cannot be repaired. Professionals must be asked to replace the entire 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light. However, if only some of the lamp beads are short-circuited, you can find this part, then remove it with a tool, and then replace the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light with the same specification of the lamp beads.
However, this condition can also be caused by unstable household voltage, especially during peak periods of electricity consumption, and normal use cannot be performed until the voltage is restored. However, if it is caused by line damage, professionals must be asked to deal with it as soon as possible to avoid dangerous accidents such as water leakage.
Precautions for using 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light
1. High temperature damage
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light has poor temperature resistance. If the soldering temperature and time are not well controlled in the production process, it is likely that the high temperature will continue, resulting in damage and suspended animation of the LED chip. In this case, the first thing to do is to control the temperature of the soldering iron. It is recommended to use a temperature-controlled soldering iron to prevent the LED chips of the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light from being burned out by high temperature. Note that the soldering iron cannot stay on the LED feet for 10 seconds, otherwise the LED chip will be easily burnt out.
2. Moisture bursts at high temperatures
There is a certain amount of water in the air. If the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light package is exposed to moisture for a long time, the moisture in the LED package will be thermally expanded due to the high temperature during overflow soldering, causing the LED package to burst and be damaged. The storage environment of 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light needs a constant temperature. If the unused 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light should be baked in an oven at about 80° for 6~8 hours for dehumidification treatment, it can be guaranteed that the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light will not Moisture.
Article summary: The above is about how to fix the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light that is not bright but has weak light and all the things you need to pay attention to when using the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light. helped.
600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light chemical material market analysis
The main driving factors of the global 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light chemical materials market include the following:
First, the growth of the market capacity of 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light drives the growth of the demand for chemical raw materials in the entire industry chain: 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light fixtures quickly penetrate into general lighting equipment, making the existing replacement lamps and the new lighting market based on 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light LED technology has huge demand, it is expected that 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light LED clips will be The compound annual growth rate is 35%. From 2013 to 2018, the compound annual growth rate of the entire LED market will reach 29.7%. With the continuous new promotion of the utilization of 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light LED in the lighting industry, it will adapt to the 600*600mm 2FT*2FT backlight Ceiling The rapid development of new technologies for flat Led Panel Light LED equipment has enabled the related chemical raw material industry to develop rapidly and surpass the development speed of the LED industry: different from the mechanical fixing equipment of traditional lamps, the market for adhesives inside LE lamps will gradually Open: 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light has less heat dissipation than traditional lamps, allowing more engineering plastics to be applied: Lens technology suitable for LEDs will generate demand for transparent plastics such as PC and PMMA.
Second, the innovation and development of 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light related technologies drive the market demand for chemical raw materials: First, the gradual promotion of the application of precision packaging technology (COB) and multi-chip assembly technology has driven the production of raw materials for chips demand. The precision packaging technology is to place the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light chip directly on the printed circuit board, while the traditional surface mounting technology produces devices with modules or pins to connect the chips and modules. The development of technology will This lead to changes in the corresponding demand for chemical raw materials.
Third, the innovative demand for the 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light industry itself provides a broad market opportunity for the promotion and application of chemical materials: traditional lighting technology can deal with the problem of waste heat in the form of light radiation, but 600*600mm The waste heat of 2FT*2FT backlight Ceiling flat Led Panel Light is stored inside the chip and needs to be cooled by a radiator, which puts forward requirements on the thermal conductivity of the material. Materials with good thermal conductivity and electrical insulation properties will be favored by the market. Compared with the traditional LED clip production to directly assemble and install the device into the lighting equipment, the module technology has gradually begun to be popularized in the production process and has begun to be promoted as a 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light Industry Association Standard, which provides a huge market opportunity for chemical raw material suppliers producing modules.
Xinjie lighting is a professional panel light manufacturer, not only selling 600*600mm 2FT*2FT backlight Ceiling flat Led Panel Light but also Frameless panel lamps, Integrated lamp tube LED Tube Light T5 and many other products.